ReFlex® — Reflective solar control
Reflects solar radiation before it becomes heat and holds the outward view, so open-plan glass stays workable and the cooling load drops at the source.
Glare killed at the screen line, heat intercepted at the façade, and the view kept across the floor plate — specified by opening, run by zone.

Reflects solar radiation before it becomes heat and holds the outward view, so open-plan glass stays workable and the cooling load drops at the source.
On the most exposed elevations, the screen intercepts solar gain outside the glass — more efficient than acting on the heat once it is already inside.
Flat, tensioned or zip-guided screens hold the fabric to tall or inclined glazing where a plain roller would sag or gap.
Shades run by zone and integrate with the building control system already specified — openly, with no proprietary lock-in.
U.S. Department of Energy field studies found whole-building summertime cooling savings of 15–25% from optimized high-efficiency shades, interior and exterior.
U.S. DOE / PNNL — Building America
A ten-month study in an occupied high-rise measured a 25% drop in energy use across heating and cooling seasons with motorized insulating shades; most occupants preferred them to the old blinds.
Illinois Institute of Technology — Willis Tower, Chicago
A peer-reviewed study of automated interior insulating shades recorded up to 20.5% daily energy reduction under automated control, projecting 20–35% savings vs. baseline.
Energy (Elsevier), 2024 — weather-normalized analysis
Findings from independent third-party research, cited as industry context. They describe what automated shading can do as a category — not a measured performance claim for any SUNX product. Outcomes vary with climate, glazing, fabric and control strategy.
See all case studies →Dozens of shades operated as one, by zone, instead of window by window.
Reflection controlled at desks, meeting rooms and video walls.
Fabric, system and control data formatted for the project submittal.
Works with the BMS and control platform already on the project.

Tell us the space and the exposure — we specify fabric, system and control to the opening.